Twin-fluid nozzles for secondary cooling in continuous casting processes

Twin-fluid nozzles for every continuous casting process.

Lechler twin-fluid nozzles for secondary cooling in continuous casting processes

Nozzle overview

Billetcooler FLEX®

Billetcooler FLEX

  • Stable spray angle (60°) within turndown ratio
  • Water flow rate: 0.3 to 8 l/min
  • Foot print: round
  • Flexible spray water distribution
More Technical data (pdf, 2.13 MB)
Billetcooler oval Spray

Billetcooler oval spray

  • Mounting on horizontal spray rings and also on vertical nozzle headers
  • Spray angle: 60/90° (wide), 30/45° (deep)
  • Flow rate range from 0.4 l/min to 12.4 l/min
  • Foot print: oval
Technical data (pdf, 1.82 MB)
Billetcooler cone spray

Billetcooler cone spray

  • Mounting on horizontal spray rings and also on vertical nozzle headers
  • Spray angle: 45°, 60°, 90°
  • Flow rate range from 0.4 l/min to 8.0 l/min
Technical data (pdf, 1.66 MB)
MasterCooler SMART

MasterCooler SMART

  • Vertical piping with square pipes
  • Mounted onto vertical adapter plates
  • Spray angle: 50°, 80°, 90°, 110°, 120°
  • Volume rate at 7 bar: 5.70 l/min to 51.1 l/min
Technical data (pdf, 2.77 MB)
Slabcooler® ECO
New

Slabcooler ECO

  • Reduced compressed air consuption results in reduced energy consumption, reduced operation costs and reduced CO2 emission
  • Excellent cost/performance ratio (ROI << 1 year)
  • Plug and spray: No modification of segment piping required, conversion during regular segment maintenance, change back to status quo possible
  • Well proven concept – high operation safety
More Technical data (pdf, 4.00 MB)
MasterCooler HARD HARD COOLING®

Mastercooler HARD HARD COOLING

  • Mounting on horizontal spray rings and also on vertical nozzle headers
  • Spray angle: 45°, 60°, 90°
  • Flow rate range from 0.4 l/min to 8.0 l/min
Technical data (pdf, 1.55 MB)