Nozzles for descaling

In hot rolling mills around the world, Lechler SCALEMASTER descaling nozzles ensure the best surface qualities and low energy consumption.

Nozzle types overview

Scalemaster HPS®
New

SCALEMASTER HPS®

  • Remarkable increase of impact for better descaling
  • Better product surface quality due to higher impact
  • Reduction of descaling water flow rate possible
  • More durable tip with high mechanical strength due to window design
  • Potential of energy savings due to reduced slab/strip cooling
  • Interchangeable with all other SCALEMASTER nozzles
Technical data (pdf, 1.90 MB)
Scalemaster HP

SCALEMASTER HP

  • For highest impact and longest life time
  • Alignment with two flats
  • Mounting with lock nut
  • Spray angle: 22°, 26°, 30°, 40°
  • Nozzle insert made from tungsten carbide
  • Max. pressure: 450 bar
  • Volume rate at 100 bar: 12.00 l/min to 134 l/min
Technical data (pdf, 1.44 MB)
MiniScalemaster HP

MiniSCALEMASTER HP

  • For highest impact and longest life time at low spray heights
  • Alignment with two flats
  • Mounting with lock nut
  • Spray angle: 22°, 26°, 30°, 40°
  • Nozzle insert made from tungsten carbide
  • Max. pressure: 450 bar
  • Volume rate at 100 bar: 12.00 l/min to 134 l/min
Technical data (pdf, 1.44 MB)
MicroScalemaster

MicroSCALEMASTER

  • Smallest dimensions for space saving mounting
  • Alignment with two flats
  • Mounting with lock nut
  • Spray angle: 22°, 26°, 30°, 40°
  • Nozzle insert made from tungsten carbide or hardened steel
  • Max. pressure: 450 bar
  • Volume rate at 100 bar: 12.00 l/min to 28 l/min
Technical data (pdf, 1.44 MB)
MiniScalemaster

MiniSCALEMASTER

  • Standard nozzle for small spray heights
  • Alignment with two flats
  • Mounting with lock nut
  • Spray angle: 22°, 26°, 30°, 40°
  • Nozzle insert made from tungsten carbide
  • Max. pressure: 450 bar
  • Volume rate at 100 bar: 12.00 l/min to 134 l/min
Technical data (pdf, 1.44 MB)
Scalemaster

SCALEMASTER

  • Standard nozzle
  • Alignment with two flats
  • Mounting with lock nut
  • Spray angle: 22°, 26°, 30°, 40°
  • Nozzle insert made from tungsten carbide
  • Max. pressure: 450 bar
  • Volume rate at 100 bar: 12.00 l/min to 134 l/min
Technical data (pdf, 3.05 MB)
Water Stop Valve for Scalemaster nozzles

Water Stop Valve for SCALEMASTER nozzles

  • Stops the water flow at low pressure
  • For Scalemaster series 694 and Scalemaster HP series 682
  • Opening pressure except MicroScalemaster 8 bar or 14 bar
  • Large free cross section, low impact loss
  • Ideal for plate-, stainless steel and Stecker mills
Technical data (pdf, 781.01 KB)
Spray headers

Spray headers

On request we design and manufacture complete spray headers according to your requirements.