Special flue gas cleaning is required to remove pollutants such as sulphur compounds (SO2 and SO3) from the flue gases of industrial plants. Flue gas desulphurization (DeSOx) is a tried and tested process for this. Efficient nozzles are crucial in flue gas desulphurization (FGD) plants, as they have to function precisely over a long period of time and withstand extremely aggressive ambient conditions. Lechler has been developing customized FGD solutions for decades, such as the HelixFlow spiral nozzle. In particular, the highly developed nozzles support the optimization of process engineering processes, help to reduce operating costs and support the achievement of ever stricter emission limits.
Robust and low maintenance design – these are the top features of the HelixFlow spiral nozzle. This is precisely why it can be used for various applications and is particularly suitable for
The compact nozzle design of the HelixFlow provides highest flow rates through comparatively smaller sizes – for lower initial cost and installation costs.
Lechler´s HelixFlow features fine droplets at higher velocity than tangential whirl chamber nozzles. The exceptional design supplies the droplet size and flow rate of conventional full cone nozzles at at a significantly lower operating pressure.
This is exactly why the HelixFlow spiral nozzle is extremely energy efficient for scrubber systems in flue gas desulphurization plants which need to run highest slurry rates at minimized pressure. The one-piece design of the nozzle has no internal components and goes with large free passages for clog-resistant performance.
The Lechler Helix nozzle as one of several forms of specific flue gas desulphurization nozzles from the Lechler portfolio, is successfully installed worldwide in FGD scrubbers which need to operate highest flow rates at lowest energy demand while providing smallest droplet sizes.
Whenever the tough conditions in FGD scrubbers indicate options, another Lechler FGD nozzle comes in, the Lechler TwinAbsorbPRO.
Besides the HelixFlow series, Lechler offers you an extensive range of nozzles for flue gas desulphurization in various designs and materials.
Lechler has developed atomizing nozzles made of ceramic materials, e.g. SIC, SISIC or ReSIC. Typical materials for FGD nozzles are silicon carbide, stellite and alloys, for general applications the nozzles are also available in 316 stainless steel.
Lechler full cone, hollow cone and flat fan nozzles meet the requirements that modern technology demands of nozzles in exhaust air purification: high-alloy and chemically resistant materials, a suitable droplet spectrum and spray patterns tailored to the application, which do not always necessarily have to be round.
Are you not sure which configuration best meets your requirements? We will gladly advise you. Just contact us!