Nozzles for descaling

• Highest impact
• New booster with integrated filter
• Additional offset angle options
• Better surface quality due to higher impact and additional offset angles
• Alternative descaling header design by new nozzle bracket
• Interchangeable with all other SCALEMASTER nozzles

Showroom SCALEMASTER ECO⁺

• Remarkable increase of impact for better descaling
• Better product surface quality due to higher impact
• Reduction of descaling water flow rate possible
• More durable tip with high mechanical strength due to window design
• Potential of energy savings due to reduced slab/strip cooling
• Interchangeable with all other SCALEMASTER nozzles

• Well-proven descaling nozzle series
• Alignment with two flats
• Mounting with lock nut
• Spray angle: 22°, 26°, 30°, 40°
• Nozzle insert made from tungsten carbide
• Max. pressure: 450 bar
• Volume rate at 100 bar: 12.00 l/min to 134 l/min

• Smallest dimensions for space saving mounting
• Alignment with two flats
• Mounting with lock nut
• Spray angle: 22°, 26°, 30°, 40°
• Nozzle insert made from tungsten carbide or hardened steel
• Max. pressure: 450 bar
• Volume rate at 100 bar: 12.00 l/min to 28 l/min

• Stops the water flow at low pressure (bypass operation)
• For all Scalemaster series except MicroScalemaster
• Closing pressure 5 bar or 10 bar
• Large free cross section, low impact loss
• Ideal for plate-, stainless steel and Steckel rolling mills

• Stops the water flow at low pressure (bypass operation)
• For all Scalemaster HPS nozzles (series 6P4) and MiniScalemaster HPS nozzles (6P3)
• Closing pressure 10 bar
• Large free cross section, low impact loss
• Ideal for plate-, stainless steel and Steckel rolling mills

On request we design and manufacture complete spray headers according to your requirements.