Designs and operating principles

Static
Static spray balls do not rotate and therefore require considerably more fluid. They are used primarily for rinsing tanks. They are inexpensive to purchase and are very robust (trouble-free).

Corresponding products:

• Cleaning nozzles of cleaning efficiency class 1

Free-spinning
The cleaning fluid drives the spray head by means of specially positioned nozzles. The rapidly repeated impacts remove the soil and rinses it from the tank surface. This results in optimum cleaning efficiency at low pressures in small to medium-sized tanks.

Corresponding products:

• Rotating cleaning nozzles of cleaning efficiency class 2
• Rotating cleaning nozzles of cleaning efficiency class 3

Controlled rotation
The rotating head is driven by the fluid. A turbine wheel with an internal gear is used to control the rotation. This ensures that the speed remains in the optimum range even at higher pressures. The droplets produced are larger and strike the tank wall at higher speed. These rotating cleaning nozzles thus achieve an even higher impact which is especially for large tanks important.

Corresponding products:

• Rotating cleaning nozzles of cleaning efficiency class 4

Gear-controlled
The cleaning fluid drives an internal gear by means of a turbine wheel so that the spray head rotates by two axes. The solid jet nozzles mounted on the spray head produce powerful jets. These jets sweep the entire tank surface in a pre-programmed, model-specific pattern during a spray cycle. This requires a certain minimum time. These models generate the highest impact and are therefore ideal for very large tanks and the toughest cleaning tasks.

Corresponding products:

• High impact tank cleaning nozzles of cleaning efficiency class 5