Lechler maintenance kit for
MeshClean 5T2/5T3

To ensure that your high impact tank cleaning machine MeshClean 5T2/5T3 works permanently and efficiently, we recommend – depending on the operating conditions – corresponding maintenance intervals. Maintenance should be carried out after 1.000 operating hours at the latest. With correspondingly harsh operating conditions, the time until maintenance can be shortened accordingly. With our maintenance kit specially adapted to the MeshClean, we offer you an option that allows you to carry out maintenance by yourself (except for ATEX versions) and thus save valuable time.

Lechler maintenance kit and assembly tool kit for MeshClean 5T2/5T3

Scope of maintenance kit and assembly tool kit for
MeshClean 5T2/5T3

Special assembly tools are required for maintenance.
Therefore, in addition to the maintenance parts kit, the assembly tool kit should also be ordered for the first maintenance.

Lechler assembly tool kit:
Order number: 5T2.000.B2.ST.00


  • Socket wrench for conventional torque wrench
  • Other special tools

As the assembly tools can be reused, ordering the maintenance parts kit is sufficient for further maintenance.

Lechler original maintenance parts kit:
Order number: 5T2.000.9E.SP.0


  • Gear unit
  • Turbine
  • Ball bearing
  • Sealing set
  • O-ring set

Contact for further information and order acceptance

Service Division General IndustryPhone +49 7123 962-0Fax +49 7123 962-444service(at)lechler.de