Lechler maintenance kits for XactClean HP+

To ensure that your XactClean HP+ rotation cleaner works permanently and efficiently, we recommend initial maintenance after 500 operating hours and further maintenance after 1,000 and 1,500 operating hours. With our maintenance kits specially designed for the XactClean HP+, we offer you tool sets with which you can carry out nozzle maintenance by yourself (except for ATEX versions).

Lechler Wartungskits für Rotationsreiniger XactClean® HP+

Scope of maintenance kits for XactClean HP+

Maintenance kits 1 – For maintenance after 500 operating hours

Lechler original maintenance parts, order number 5S5.000.1Y.00.50.0 with

  • Pin (gear output)
  • Seal kit

Maintenance kits 2 – For maintenance after 1,000 operating hours

Lechler original maintenance parts, order number 5S5.000.1Y.00.60.0 with

  • Drive set (turbine)
  • Gearing unit
  • Pin (gear output)
  • Seal kit

Maintenance kits 3 – For maintenance after 1,500 operating hours

Lechler original maintenance parts, product number 5S5.000.1Y.00.70.0 with

  • Bearing unit
  • Pin (gear output)
  • Seal kit

An assembly tool is also required for maintenance:
Lechler assembly tool / special tool, order number 05S.590.16.00.00.0

Contact for further information and order acceptance

Service Division General IndustryPhone +49 7123 962-0Fax +49 7123 962-444service(at)lechler.de