Lechler maintenance kit forXactClean HP 2
To ensure that your rotating cleaning nozzle XactClean HP 2 works permanently and efficiently, we recommend carrying out regular maintenance intervals, depending on the operating conditions. As a rule, we recommend maintenance after 750 operating hours when operating at the recommended operating pressure of 3 bar. Under harsh operating conditions, the maintenance interval might be shortened accordingly. With our maintenance kit specially adapted to the XactClean HP 2, we offer you an option that allows you to carry out maintenance by yourself (except for ATEX versions) and thus save valuable time.
Scope of maintenance kits for XactClean HP 2
Maintenance kits 1 – For maintenance after 750 operating hours
Lechler original maintenance parts, order number 5S6.000.1Y.SP.10 with
- turbine
- pin
- O-rings
Maintenance kits 2 – For maintenance after 1,500 operating hours
Lechler original maintenance parts, order number 5S6.000.1Y.SP.20 with
- turbine
- gear unit
- pin
- O-rings
Maintenance kits 3 – For maintenance after 2,250 operating hours
Lechler original maintenance parts, order number 5S6.000.1Y.SP.30 with
- turbine
- Bearing unit
- pin
- O-rings
An assembly tool is also required for maintenance 3:
Lechler assembly tool / special tool, order number 5S6.000.1Y.ST.00